FOR MUNICIPAL ASSOCIATIONS

IS YOUR MUNICIPALITY A MEMBER OF AN ASSOCIATION OR ANY OTHER GROUPING, SUCH AS A LOCAL ACTION GROUP?

ARE YOU RESPONSIBLE FOR MANAGING AND MAINTAINING LOCAL ROADS, BIKE PATHS OR OTHER ASPHALT SURFACES?

Have you found out that the constant solving of even minor repairs of local roads through a sub-contractor’s company represents unwelcome financial interference in the municipal budget as well as an uncertain quality guarantee?

Do you like to have work ensured by your own resources?

Poor road conditions and potholes are among the common problems that make life unpleasant to citizens and jeopardize their safety. The problem concerns not only drivers but also cyclists and pedestrians. Pothole corrections are often not solved in time and repairs are only attempted when a damaged road represents a real danger.

We have a unique solution for you!

Repair potholes with your own funds permanently, at a fair quality level and in a cost-efficient way.

We have developed a unique technology for pothole repairs and we now offer our products - FT3 device or System container - to be purchased in joint ownership.

Repairs with the FUTTEC technology may also be executed in winter, when permanent repairs cannot be done while using other technologies. A pothole repair takes about an hour and can be carried out by a two-member crew. We are offering both warranty and post-warranty servicing and personnel training.

WHAT PRODUCTS DO WE OFFER:

FT3 device – FT3 device heats up asphalt surfaces and is used to execute the permanent repair of roadways e.g. potholes. Find out more about the FT3 device

System Container – The system container enables the simple storage and transportation of all the equipment and material required for pothole repairs and other faults using microwave technology. Find out more about the complex container

Microwave furnace – The FUTTEC microwave furnace is intended for to heat asphalt mixtures by means of microwave technology, which ensures a uniform heating of all of the inserted material without overheating or related asphalt binder degradation. Find out more about the microwave furnace

---

Why are potholes repaired this way:

• Homogenous surfaces – our special technology will ensure that the new material will merge into the surrounding surface. Neither dangerous unevennesses for drivers nor technologically undesirable cracks are formed, which could significantly reduce the longevity of the repair life cycle.

• All year-round repairs – road repairs may be carried out over the whole year and even during the winter.

• Non-dependence – we are not dependent on subcontractors, which could clash seasonally, causing shutdowns for hot pre-coated asphalt mixture supplies for permanent repairs.

• Various types of asphalt roadways – repairs may be executed on asphalt roadways of various sizes (streets, roads, highways, local roads, bike paths, airports, racetracks) as well as in hard-to-reach places (steeper driveways or loading docks).

• Repairs are carried out quickly and permanently – a pothole repair is executed by a two-member crew in about an hour following the start of work.

• Efficiency – using FUTTEC technology is less demanding in terms of time and energy. The efficiency saves you financial expenses.

• Technical repair certificate – during the repair works, the FT3 device generates a technical repair certificate. This includes information on the time, location and duration of the repair. The protocol is also a guarantee of the quality of the repair.

• Environmental protection – ecology matters to us. We do not remove unnecessary material around the pothole. The material intended for repairs is heated up just before it is used, thus heat losses do not occur. We use only the indispensable amount of mixture for repairs.

• Unique know-how – the advanced FUTTEC technology represents a high-quality approach to pothole repairs and presents a solution to a problem which annoys citizens throughout the world.

Find out more in the about us section.

APART FROM SALES, WE OFFER MUNICIPAL ASSOCIATIONS LONG-TERM LEASES OF OUR PRODUCTS.

Would you like to know more? Contact us. We will be happy to assist you.

FOR ROAD REPAIR COMPANIES

Are you a road repair company that works on roads, local roads, highways or bike paths?

ARE YOU ACTIVE IN ROAD REPAIRS? DO YOU REPAIR ASPHALT ROADS FOR REGIONS, CITIES, MUNICIPALITIES OR FOR PRIVATE ROAD OWNERS?

We have developed a unique technology in collaboration with the Academy of Sciences of the Czech Republic, enabling high quality and permanent repairs of asphalt surface faults. Using FUTTEC technology, you can repair various types of impairments – starting from minor cracks to unevenness up to potholes with a maximum size of 70 x 50 cm.

You can perform pothole repairs using microwave technology all year-round, independently of sub-contractors and the seasonality of supplies. Read more about the FUTTEC Technology.

We offer following products to road repair companies:

FT3 device – FT3 equipment heats up asphalt surfaces used to execute the permanent repair of roadways e.g. potholes. Find out more about the FT3 device

System Container – The system container enables the simple storage and transportation of all the equipment and material required for pothole repairs and other faults using microwave technology. Find out more about the complex container

Microwave furnace – The FUTTEC microwave furnace is intended for to heat asphalt mixtures by means of microwave technology, which ensures a uniform heating of all of the inserted material without overheating or related asphalt binder degradation. Find out more about the microwave furnace

Unique know-how for road repairs:

• Homogenous surfaces – our special technology will ensure that the new material will merge into the surrounding surface. Neither dangerous unevennesses for drivers nor technologically undesirable cracks are formed, which could significantly reduce the longevity of the repair life cycle.

• All year-round repairs – road repairs may be carried out over the whole year and even during the winter.

• Independence – we are not dependent on subcontractors, which could clash seasonally, causing shutdowns for hot pre-coated asphalt mixture supplies for permanent repairs.

• Various types of asphalt roadways – repairs may be executed on asphalt roadways of various sizes (streets, roads, highways, local roads, bike paths, airports, racetracks) as well as in hard-to-reach places (steeper driveways or loading docks).

• Repairs are carried out quickly and permanently – a pothole repair is executed by a two-member crew in about an hour following the start of work.

• Efficiency – using FUTTEC technology is less demanding in terms of time and energy. The efficiency saves you financial expenses.

• Technical repair certificate – during the repair works, the FT3 device generates a technical repair certificate. This includes information on the time, location and duration of the repair. The protocol is also a guarantee of the quality of the repair.

• Environmental protection – ecology matters to us. We do not remove unnecessary material around the pothole. The material intended for repairs is heated up just before it is used, thus heat losses do not occur. We use only the indispensable amount of mixture for repairs.

• Online Transparency – The machine allows you to share the technical protocol information online. For example, it can be shared on the web site of the communications administrators.

• Unique know-how – the advanced FUTTEC technology represents a high-quality approach to pothole repairs and presents a solution to a problem which annoys citizens throughout the world.

• Certification – the device is certified from a health and safety standard.

• We provide training for your staff.

Find out more in the about us section.

Want to know more? Let us know, we will be happy to help.